What is BS 2C 8 - Specification for geometry and the dimensions of rails and studs about?
BS 2C 8 specifies the geometry and the partial dimensions of rails and studs used for securing passenger equipment and for cargo restraint, necessary to ensure interchangeability of these items.
Individual strength requirements will determine the complete rail shape, such as incorporating the standard section integrally into an I-beam extrusion.
The overall shape of the studs above the top of the rail will depend upon the application. The upper portion may be cylindrical to fit into the tubular structure of a seat or galley unit. Alternatively, it may have a ring attached to serve as a tiedown point for a rope or strap.
The rail imparts loads in the upward, downward, sideward, forward and aft directions.
Forward and aft loads are applied to the track by means of a “shear plug”, a part of the pin assembly (or structure to which the stud is joined) which engages in the rail notches [20,8 mm (0.800 in) in diameter], but this is not included in BS 2C 8.
In the case of seat attachment or similar application, the downward load is applied to the upper face of the rail by a fitting which is also part of the seat, but this is not included in BS 2C 8.
Who is BS 2C 8 - Specification for geometry and the dimensions of rails and studs for?
BS 2C 8 on specification for geometry and the dimensions of rails and studs is useful for:
- Manufacturers of rails and studs
- Material handling equipment manufacturers
- Product designers
- Quality control and inspection personnel
- Companies providing air transport engineering solutions
- The aerospace industry
- National authorities
- Regulatory bodies
Why should you use BS 2C 8 - Specification for geometry and the dimensions of rails and studs?
BS 2C 8 specifies the geometry of aircraft floor rails which are normally set longitudinally into an aircraft floor structure. Seats, galleys, bulkheads and other removable or adjustable equipment are normally secured into the seat rails by means of studs.
This concept is also widely used in the air cargo field for the restraint of cargo: the most frequent application being in the attachment of cargo nets to pallets.
BS 2C 8 provides you with the dimensional and strength requirements for rails and studs.
BS 2C 8 is concerned only with the configuration of rails and studs. The load-carrying capacity can be determined by the strength of the materials from which the items are manufactured and by the strength of the structure to which they are attached.
Thus, BS 2C 8 is your guide on ensuring the rails and studs are fit to meet the performance requirements of the end-application.