What is BS 6200-3.1.4 – Ferrous metals about?
BS 6200-3.1.4 standard is a part of the BS 6200 series that discusses the non-alloyed steel using flame atomic absorption spectrometric method for sampling and analysis of iron, steel and other ferrous metals. Ferrous metals such as cast and wrought iron or carbon steel are known for their tensile strength and durability.
BS 6200-3.1.4 specifies a flame atomic absorption spectrometric method for the determination of acid-soluble and/or total aluminum in non-alloyed steel. The method is applicable to aluminum contents between 0,005 % (m/m) and 0,20 % (m/m).
Who is BS 6200-3.1.4 – Ferrous metals for?
BS 6200-3.1.4 on non-alloyed steel of ferrous metals applies to:
- Manufacturer of non-alloyed steel
- Quality testing personnel
- Ferrous metals engineers
Why should you use BS 6200-3.1.4 – Ferrous metals?
Non-alloy steel is used in the field of construction where metals with high strength are required. Flame atomic absorption is a very common technique for detecting metals and metalloids in environmental samples. It is very reliable and simple to use.
BS 6200-3.1.4 provides you with the spectrometric measurements which set the scale expansion so that the calibration solution of the highest concentration gives nearly full-scale deflection. This helps you in determining the aluminum of non-alloyed steel using the flame atomic absorption spectrometric method. BS 6200-3.1.4 also provides a principle in which the spectrometric measurements of the atomic absorption of the 309,3 nm spectral line are emitted by an aluminum hollow cathode lamp.
With obedience and compliance to BS 6200-3.1.4, you can efficiently provide methods for the sampling and analysis of iron, steel and other ferrous metals.