1 Scope
This European Standard defines guidelines for the inspection of installed and operational
functions of Building Automation, Controls and Technical Building Management System
including its configuration.
Table 1 shows the relative position of this standard within the set of EPB standards in the
context of the modular structure as set out in EN ISO 52000‑1:2017.
NOTE 1 In CEN ISO/TR 52000‑2:2017 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.
Table 1
—
Position of this standard (in casu M10–11), within the modular structure of the set
of EPB standards
| Over-arching |
Building
(as such) |
Technical Building System | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Submodule | Descriptions | Descriptions | Descriptions | Heating | Cooling | Ventilation | Humidification | Dehumidification | Domestic Hot waters | Lighting | Building automation and control | PV, wind, .. |
| sub1 | M1 | M2 | M3 | M4 | M5 | M6 | M7 | M8 | M9 | M10 | M11 | |
| 1 | General | General | General | |||||||||
| 2 | Common terms and definitions; symbols, units and subscripts |
Building Energy Needs | Needs | |||||||||
| 3 | Application | (Free) Indoor Conditions without Systems | Maximum Load and Power | |||||||||
| 4 | Ways to Express Energy Performance | Ways to Express Energy Performance | Ways to Express Energy Performance | |||||||||
| 5 | Building Functions and Building Boundaries | Heat Transfer by Transmission | Emission and control | |||||||||
| 6 | Building Occupancy and Operating Conditions | Heat Transfer by Infiltration and Ventilation | Distribution and control | |||||||||
| 7 | Aggregation of Energy Services and Energy Carriers | Internal Heat Gains | Storage and control | |||||||||
| 8 | Building Partitioning | Solar Heat Gains | Generation and control | |||||||||
| 9 | Calculated Energy Performance | Building Dynamics (thermal mass) | Load dispatching and operating conditions | |||||||||
| 10 | Measured Energy Performance | Measured Energy Performance | Measured Energy Performance | |||||||||
| 11 | Inspection | Inspection | Inspection | x | ||||||||
| 12 | Ways to Express Indoor Comfort | BMS | ||||||||||
| 13 | External Environment Conditions | |||||||||||
| 14 a | Economic Calculation | |||||||||||