1 Scope
This European Standard specifies:
-
— a structured list of control, building automation and technical building management functions which contribute to the energy performance of buildings; functions have been categorized and structured according to building disciplines and so called Building automation and control (BAC);
-
— a method to define minimum requirements or any specification regarding the control, building automation and technical building management functions contributing to energy efficiency of a building to be implemented in building of different complexities;
-
— a factor based method to get a first estimation of the effect of these functions on typical buildings types and use profiles;
-
— detailed methods to assess the effect of these functions on a given building.
Table 1 shows the relative position of this standard within the set of EPB standards in the
context of the modular structure as set out in EN ISO 52000‑1.
NOTE 1 In CEN ISO/TR 52000‑2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.
Table 1
—
Position of this standard (in casu M10–4,5,6,7,8,9,10), within the modular structure
of the set of EPB standards
|
Over-arching
|
Building (as such)
|
Technical Building System
|
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Submodule
|
Descriptions
|
Descriptions
|
Descriptions
|
Heating
|
Cooling
|
Ventilation
|
Humidification
|
Dehumidification
|
Domestic Hot waters
|
Lighting
|
Building automation and control
|
PV, wind, ..
|
|
sub1
|
M1
|
M2
|
M3
|
M4
|
M5
|
M6
|
M7
|
M8
|
M9
|
M10
|
M11
|
|
| 1 | General | General | General | |||||||||
| 2 | Common terms and definitions; symbols, units and subscripts | Building Energy Needs | Needs | |||||||||
| 3 | Application | (Free) Indoor Conditions without Systems | Maximum Load and Power | |||||||||
| 4 | Ways to Express Energy Performance | Ways to Express Energy Performance | Ways to Express Energy Performance | x | ||||||||
| 5 | Building Functions and Building Boundaries | Heat Transfer by Transmission | Emission and control | x | ||||||||
| 6 | Building Occupancy and Operating Conditions | Heat Transfer by Infiltration and Ventilation | Distribution and control | x | ||||||||
| 7 | Aggregation of Energy Services and Energy Carriers | Internal Heat Gains | Storage and control | x | ||||||||
| 8 | Building Partitioning | Solar Heat Gains | Generation and control | x | ||||||||
| 9 | Calculated Energy Performance | Building Dynamics (thermal mass) | Load dispatching and operating conditions | x | ||||||||
| 10 | Measured Energy Performance | Measured Energy Performance | Measured Energy Performance | x | ||||||||
| 11 | Inspection | Inspection | Inspection | |||||||||
| 12 | Ways to Express Indoor Comfort | BMS | ||||||||||
| 13 | External Environment Conditions | |||||||||||
| 14 a | Economic Calculation | |||||||||||